Makita TL064DZ 12V Max Angled Impact Driver Tool Only Australia

Tools and Hardware Australia

• Makita TL065DZ 12V Max Angled 3/8" Impact Wrench Tool Only

  

  On sale Makita TL065DZ - 12V Max Angled 3/8" Impact Wrench (Tool Only). Features Aluminium angle head Large variable speed paddle switch 60Nm max. fastening torque LED joblight Specifications Drive Shank: 3/8" Square Impacts Per Minute: 0-3,000ipm Max Fastening Torque: 60Nm Net Weight: 1.5kg with 4.0Ah (BL1041B) No Load Speed: 0-2,000rpm Overall Length: 380mm. Browse our range of MAKITA products available on sale in Australia.
• HiKOKI NT1865DBALH4Z 18V Brushless 15Ga Angled Bradder Tool Only Australia

  

  On sale HiKOKI NT1865DBAL(H4Z) - 18V Brushless 15Ga Angled Bradder (Tool Only). HiKOKI Nailers are as fast as traditional gas-driven nailers but safer, cleaner, easier and far more cost effective to use. Not to mention much less noisy and more environmentally friendly. HiKOKI NT1865DBAL 18V Brushless 65mm DA Finish Nailer, Naked is ideal for general finishing applications, door jambs, architraves and skirting boards. Features Lower running cost than gas nailers Unique air drive system More nails driven per charge; approximately…
• HiKOKI NT1865DAH4Z 18V Brushless 16Ga 65mm Angled Bradder Tool Only

  

  On sale HiKOKI NT1865DA(H4Z) - 18V Brushless 16Ga 65mm Angled Bradder (Tool Only). Features Powered by brushless motor Stable driving force to improve work efficiency 20° nail angle provides better access into tight spaces Drive up to 2,900 nails per charge Dry-fire lockout function stops the nailer from being fired when nail levels are low Stable operation in various cold environments Low running costs as there is no fuel cell Reduced maintenance due to no gas cartridges Tool-less drive depth…
• Milwaukee M18FN15GA 0C 18V Brushless 15Ga Angled Finishing Nailer Tool Only

  

  On sale Milwaukee M18FN15GA-0C - 18V Brushless 15Ga Angled Finishing Nailer (Tool Only). The M18 FUELâ„¢ 15 Gauge Angled Finishing Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the 15 Gauge Nailer allows the user to consistently sink nails to the required depth in hard and soft woods while leaving clean nail holes, allowing for repeatable results and easy filling. The nitrogen air…
• Milwaukee M18FN16GA 0C 18V Brushless 16Ga Angled Finishing Nailer Tool Only

  

  On sale Milwaukee M18FN16GA-0C - 18V Brushless 16Ga Angled Finishing Nailer (Tool Only). The M18 FUELâ„¢ 16 Gauge Angled Finishing Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the 16 Gauge Nailer allows the user to consistently sink nails to the required depth in hard and soft woods while leaving clean nail holes, allowing for repeatable results and easy filling. The nitrogen air…
• Makita DFL020FZ 18V Brushless 0.5 2Nm 3/8" Angled Torque Wrench Tool

  

  On sale Makita DFL020FZ - 18V Brushless 0.5-2Nm 3/8" Angled Torque Wrench (Tool Only). Features Torque control between 0.5 - 2Nm Automatic shut off when desired torque is reached Programmable speed control between 100-1,300 rpm Powered by a powerful and efficient heavy duty brushless motor LED joblight with after-glow function Specifications Drive Shank: 3/8" Square No Load Speed: 100-1,300rpm Overall Length: 397mm Skin weight: 1.0kg Torque range: 0.5-2Nm Voltage: 18V Weight (with battery): 1.6kg. Browse our range of MAKITA products…