Makita DK0131G302 – 40V Max Brushless 3 Piece Drill/Wrench/Grinder Combo Kit (2 x 4.0Ah)

Description

Includes
HP001GZ – 40V Max Brushless Hammer Driver Drill
TW001GZ – 40V Max Brushless 3/4″ Impact Wrench
GA013GZ – 40V Max Brushless 125mm (5″) Paddle Switch Angle Grinder
BL4040 x2 – 40V Max 4.0Ah Battery
DC40RA – 40V Max Single Port Rapid Charger
199935-1 – Tote Bag
HP001GZ – 40V Max Brushless Hammer Driver Drill
Heavy duty power with 141Nm peak torque
Active feedback sensors shut down the tool in the event of a kickback
Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
35% faster drilling speed compared with the equivalent 18V model
Electronic clutch for selecting between 41 torque range settings
Impact Rate: Hi: 0 – 39,000ipm / Lo: 0 – 9,750ipm
Max. drilling capacities in masonry: 20mm
Max. drilling capacities in steel: 20mm
Max. drilling capacities in wood: Auger bit: 50mm, Self-feeding bit: 76mm, Hole saw: 152mm
Max. lock torque: 125Nm
Max. peak torque: 141Nm
Max. tightening torque: Hard: 140Nm / Soft: 68Nm
No Load Speed: Hi: 0 – 2,600rpm / Lo: 0 – 650rpm
Overall Length: 182mm
Skin weight: 2.0kg
Voltage: 40V Max
Weight (with battery): 3.0kg (BL4040)
Includes
Grip assembly (127551-9)
Belt hook assembly (346317-0 & 251314-2)
+- BIT 2-45 (784637-8)
Bit holder (452947-8)
Stopper pole assembly (122576-8)
TW001GZ – 40V Max Brushless 3/4″ Impact Wrench
Heavy duty power with 2,050Nm nut busting torque
High durability construction with battery vibration suppression protecting the battery
Optimised application selector with 6 modes adapting speed and impacts for each task
Full speed mode shortens the distance of trigger travel required to hit full speed
4 Stage power selection for optimum rpm and fastening torque
Drive Shank: 3/4″ Square C-Ring
Impact Rate: Max: 0-2,500ipm / Hard: 0 – 2,400ipm / Med: 0 – 2,200ipm / Soft: 0 – 1,900ipm
Max. capacities high tensile bolt: M10 – M27
Max. capacities standard bolt: M12 – M36
Max. fastening torque: Max: 1,800Nm / Hard: 1,500Nm / Medium: 840Nm / Soft: 450Nm
No Load Speed: Max: 0-1,800rpm / Hard: 0 – 1,400rpm / Med: 0 – 1,150rpm / Soft: 0 – 950rpm
Nut busting torque: 2,050Nm
Overall Length: 217mm
Skin weight: 3.2kg
Voltage: 40V Max
Weight (with battery): 4.2kg (BL4040)
GA013GZ – 40V Max Brushless 125mm (5″) Paddle Switch Angle Grinder
Heavy duty power cutting 40% faster than the 18V equivalent model
High durability with advanced protection against heat and dust
Active feedback sensors shut down the tool in the event of a kickback
Enhanced safety features including an electric brake, soft start and anti-restart
Improved heat dissipation capacity allows for continuous heavy duty use
Electric Brake: Yes
No Load Speed: 8,500rpm
Overall Length: 410mm
Skin weight: 2.2kg
Switch Type: Paddle Switch
Voltage: 40V Max
Weight (with battery): 3.2kg (BL4040)
Wheel diameter: 125mm (5″)
Includes
Side Handle (158237-4)
Grinding Wheel (A-80656)
Lock Nut Wrench (782423-1)