Category: Enerdrive

In stock Enerdrive EN-RCB60 Surface Mount Resettable Breaker -60amp. Available in Australia from the official Enerdrive stockist My Generator.

Enerdrive EN-RCB60 Surface Mount Resettable Breaker -60amp . Enerdrive's affordable range of surface mount circuit breaker while keeping with the high quality that our customers have come to expect.

Unit between 25-70amp have 1/4 studs while the larger units 80150amp have the larger 3/8 studs for Quality DC connections.

Please Note: Check the Enerdrive Charger Manual for recommended Breaker & Cable sizing.

Brand Enerdrive
SKU EN-RCB60
Stockist My Generator

In stock Enerdrive ePOWER 500W 24V Pure Sine Wave Inverter. Available in Australia from the official Enerdrive stockist My Generator.

Enerdrive ePOWER 500W 24V Pure Sine Wave Inverter , with ePOWERs state of the art, easy to use design, this 500W 24V inverter will offer you reliable service for providing AC power and 5V USB power for your home, boat, caravan, 4WD or commercial vehicle

The Enerdrive ePOWER 500W Inverter can run many AC powered appliances when you need AC power anywhere. The 5V USB power can charge any USB powered devices.

Features

Australian GPO Outlets
True sine wave output is ideal for operating motor loads, and to reduce stress on surge protection circuitry, meaning potentially longer equipment life
Audio alarm with warning/error codes to alert the user to check inverter condition before the unit shutdown
Automatic shutdown protects overload, over temperature and low/high battery conditions
High surge capacity for products that require more power to start (2 x constant)
High-efficiency conversion of battery available power to AC power
Mounting brackets for permanent installation
Heavy duty DC battery stud connectors
Includes 5V USB port
5 Year warranty

Brand Enerdrive
SKU EN1105S-24
Stockist My Generator

In stock Enerdrive ePOWER 2000W 12V Pure Sine Wave Inverter with RCD & AC Transfer Switch. Available in Australia from the official Enerdrive stockist My Generator.

The Enerdrive ePOWER 2000W 12V Pure Sine Wave state of the art, easy to use inverter will offer you reliable service for providing AC power for your home, boat, 4WD, truck or Caravan.

The ePOWER 2000W Inverter incorporates a 16A AC Transfer Switch which allows for seamless AC power transfer between Mains/Generator and Inverter. This helps to keep your appliances running with almost no break time on AC transfer and allows for a much simpler installation on-board. This inverter is built to operate basic equipment such as power tools, computers, microwave ovens, televisions and other appliances that use up to 2000W of power for operation.

Features

Seamless 16A AC Internal Transfer Switch
AC RCD/Safety Switch with test button
Removable LED Remote Control Display Panel
Regulated Pure Sine Wave Output
Silent Operation
Compact Size for Easy Installation
USB Port for charging USB devices
PS6 Mode
AC Transfer Cable
5 Year warranty

New PS Mode

ePOWER Enerdrive Inverters with AC Transfer Switch now include the new PS6 mode.

AC Transfer Cable Now Included as Standard

Now included with all AC Transfer Switch. Inverters is a 4 metre AC lead with molded Male/Female IEC Plugs fitted. This allows the installer to cut the lead and hardwire the IEC plugs directly. This will speed up installation time and eliminate any connection issues within the plug.

Brand Enerdrive
SKU EN1120S-X
Stockist My Generator

In stock Enerdrive ePOWER 2000W 24V Pure Sine Wave Inverter with RCD & AC Transfer Switch. Available in Australia from the official Enerdrive stockist My Generator.

The Enerdrive ePOWER 2000W 24V Pure Sine Wave state of the art, easy to use inverter will offer you reliable service for providing AC power for your home, boat, 4WD, truck or Caravan.

The ePOWER 2000W Inverter incorporates a 16A AC Transfer Switch which allows for seamless AC power transfer between Mains/Generator and Inverter. This helps to keep your appliances running with almost no break time on AC transfer and allows for a much simpler installation on-board. This inverter is built to operate basic equipment such as power tools, computers, microwave ovens, televisions and other appliances that use up to 2000W of power for operation.

Features

Seamless 16A AC Internal Transfer Switch
AC RCD/Safety Switch with test button
Removable LED Remote Control Display Panel
Regulated Pure Sine Wave Output
Silent Operation
Compact Size for Easy Installation
USB Port for charging USB devices
PS6 Mode
AC Transfer Cable
5 Year warranty

New PS Mode

ePOWER Enerdrive Inverters with AC Transfer Switch now include the new PS6 mode.

AC Transfer Cable Now Included as Standard

Now included with all AC Transfer Switch. Inverters is a 4 metre AC lead with molded Male/Female IEC Plugs fitted. This allows the installer to cut the lead and hardwire the IEC plugs directly. This will speed up installation time and eliminate any connection issues within the plug.

Brand Enerdrive
SKU EN1120S-X-24V
Stockist My Generator

In stock Enerdrive 20A AC to DC Battery Charger with Installation Kit. Available in Australia from the official Enerdrive stockist My Generator.

Enerdrive 20A AC to DC Battery Charging Installation Kit, includes Circuit Breakers, Lugs and Heavy Duty 16mm Twin Core Cable, 5 Year warranty.

Kit Includes:

20Amp 12V ePower Battery Charger EN31220
16mm Twin Core Cable 1.5 Meter
30 Amp Manual Reset Circuit Breaker x1 Piece
16MM 6MM Diameter Cable Lugs x2 Pieces & 16MM 8MM Diameter Cable Lugs x4 Pieces

ePOWER 12V 20A Battery Charger:

The Enerdrive ePOWER 20A Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.

As dictated by battery manufacturers recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging.

The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank).

20A Battery Charger Features:

Multistage Charging: Fully automatic multistage 20A battery charger with the ability to charge 3 separate battery banks.
Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
Smart Charging: The ePOWER 20A battery charger will regulate its output based on the loads connected to your battery banks.
Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
LED Display: Easy to use set and select menu along with scrolling charger status.
Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
Temperature Sensor: Battery temperature sensor included with 3 meter cable.
5 Year Warranty from an Australian company renowned for customer support.

Brand Enerdrive
SKU MYG-Charger20-KIT
Stockist My Generator

In stock Enerdrive 40A AC to DC Battery Charger with Installation Kit. Available in Australia from the official Enerdrive stockist My Generator.

Enerdrive 40A AC to DC Battery Charging Installation Kit, includes Circuit Breakers, Lugs and Heavy Duty 16mm Twin Core Cable, 5 Year warranty.

Kit Includes:

40Amp ePower Battery Charger
16mm Twin Core Cable 1.5 Meters
50 Amp Manual Reset Circuit Breaker
16MM 6MM Diameter Cable Lugs x2 Pieces
16MM 8MM Diameter Cable Lugs x4 Pieces

ePOWER 40A Battery Charger:

The Enerdrive ePOWER 40A Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.

As dictated by battery manufacturers recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging.

The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank).

40A Battery Charger Features:

Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
Smart Charging: The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks.
Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
LED Display: Easy to use set and select menu along with scrolling charger status.
Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
Temperature Sensor: Battery temperature sensor included with 7.5 meter cable.
5 Year Warranty from an Australian company renowned for customer support.

Brand Enerdrive
SKU MYG-CHARGER40-KIT
Stockist My Generator

In stock Enerdrive 60A AC to DC Battery Charger with Installation Kit. Available in Australia from the official Enerdrive stockist My Generator.

Enerdrive 60A AC to DC Battery Charging Installation Kit, includes Circuit Breakers, Lugs and Heavy Duty 16mm Twin Core Cable, 5 Year warranty.

Kit Includes:

60Amp 12V ePower Battery Charger EN31260
16mm Twin Core Cable 1.5 Meters

Brand Enerdrive
SKU MYG-CHARGER60-KIT
Stockist My Generator

In stock Enerdrive 40A DC to DC Battery Charger with Installation Kit. Available in Australia from the official Enerdrive stockist My Generator.

Enerdrive 40A DC to DC Battery Charging Installation Kit, includes Circuit Breakers, Lugs and Heavy Duty 16mm Twin Core Cable, 5 Year warranty.

This kit has been designed for in-vehicle installation.

Kit includes:

12V 40A ePOWER DC2DC Battery Charger – 12V 40A, EN3DC40+
16mm Twin Core Cable 6 Meters
16MM 8mm Diameter Cable Lugs x12 Pieces

70 Amp Manual Reset Circuit Breaker x1 Piece

60 Amp Manual Reset Circuit Breaker x1 Piece

ePOWER 12V 40A DC2DC Battery Charger:

designed to meet the rugged demands of Australian conditions and delivering multiple source charging for DC systems.

The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller.

Features:

Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
DC M6 screw terminals that will allow for large battery cable connection between all sources
A dedicated Maximum Power Point (MPPT) solar regulator
The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
40A output up to 40+C with thermo controlled fan cooling
Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
Temperature sensor included in charger for more accurate battery charging

For In Vehicle & Marine Wiring Diagram, click below:

For Towed Vehicle Wiring Diagram, click below:

70 Amp Manual Reset Circuit Breaker:

Hi-Amp Circuit Breaker. 1/4"""" Stainless Steel Stud

Brand Enerdrive
SKU MYG-DC2DC40-KIT
Stockist My Generator

In stock Enerdrive B-TEC 125Ah Lithium Battery. Available in Australia from the official Enerdrive stockist My Generator.

Enerdrive B-TEC 125Ah Lithium Battery, 5 Years Warranty. The Enerdrive B-TEC 12V 125Ah G2 Lithium Battery now comes with a Battery Strap. Enerdrive are proud to introduce the new ePOWER B-TEC 125Ah Lithium Battery with Smart Phone Monitoring Technology.

The ePOWER B-TEC is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

Smart Phone Monitoring System

The Enerdrive ePOWER B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android or Apple app to your smartphone or tablet device, you can monitor the following information;

Battery Capacity
Battery Voltage
Battery Current (Amps)

Battery State of Charge (SOC)
Battery State of Health (SOH)
Battery Status

Individual Cell Voltage
Battery Temperature
Battery Cycles

Battery Alarms
Battery Event Information

Battery Management System

The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings
Lithium v AGM Capacities;

125Ah Lithium = 200Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The ePOWER B-TEC battery is perfect for camper trailers, 4WDs (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.

With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.

Please Note: The G2 battery is capable to be paralleled to a second G2 battery. For maximum performance and lifespan of your G2 battery, no more than 4 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.

*Note: As stipulated by the manufacturer Enerdrive, failure to charge the Enerdrive Lithium Battery range with an Enerdrive or Redarc Lithium Profile battery charger will void Enerdrive manufacturer warranty.

Brand Enerdrive
SKU EPL-125BT-12V
Stockist My Generator

In stock Optional Remote Control for Enerdrive ePOWER AC Chargers. Available in Australia from the official Enerdrive stockist My Generator.

Enerdrive ePOWER AC Chargers, Optional Remote Control . Enerdrive ePower AC battery chagrers Remote Control, for AC chargers only.

Features:

AC chargers.
92 mm x 94 mm.

*NOTE: A qualified technician is required to install the Remote Panel to the AC charger. Take caution when working with batteries. Always disconnect the AC Power before you make any installation.

Brand Enerdrive
SKU EN3REM
Stockist My Generator

In stock Enerdrive DIY Dual Battery Kit. Available in Australia from the official Enerdrive stockist My Generator.

Enerdrive DIY Dual Battery Kit, 5 Year Warranty. The Enerdrive Dual Battery Kit allows for safe charging and separation of starting and auxiliary batteries in all 12 volt marine, 4WD, caravan and solar applications. When the engine is started, starting and auxiliary batteries are separated allowing only the starting battery to be charged. When the charge voltage reaches 13.3 volts the Voltage Sensitive Relay engages allowing both starting and auxiliary batteries to be charged. This is indicated by the red light in the top LH corner being illuminated. When the engine is stopped and the battery voltage falls below 12.8 volts the VSR disengages separating the start and auxiliary batteries, at this point the indicator light will be out and the auxiliary battery continues to power any accessories without risk of draining the starting battery. The Enerdrive VSR also has Dual Sensing which senses the charge of both batteries. If either battery is receiving a charge, e.g. a battery charger is connect to the auxiliary battery; the VSR will engage and charge both batteries.

Brand Enerdrive
SKU EN61010
Stockist My Generator

In stock Enerdrive ePRO Inverter / Charger 1600W. Available in Australia from the official Enerdrive stockist My Generator.

Kit includes: Universal Remote Control and Cable

Enerdrive ePRO Inverter / Charger 1600W.

The main task of the ePRO Combi Inverter Charger is to act as an uninterruptible AC power supply (UPS). In case of a grid/generator failure or disconnection, the ePRO Combi immediately stops charging the battery, releases the AC transfer switch and activates the inverter which takes over the supply to the connected loads. All this is achieved so fast, that even very critical loads like computers will continue to operate without any problems. In case the grid/generator is reconnected again and the voltage and frequency are within acceptable limits, the ePRO Combi activates the AC transfer switch and battery charger again, while deactivating the inverter. The connected loads are now supplied again by the grid/generator without any interruption.

Available in 12v, 24v or 48v models and ranging in sizes from 1600-3500w inverter output and 35-120A charger output, the ePRO Combi has a unit to suit nearly any application.

Additionally, the ePRO Inverter Charger offers features like :

AC Input Power Boost , which temporarily assists weak AC input sources when the connected load needs more power than available from the grid or generator.
AC Input Current Limit , which limits the maximum current consumed from the AC input source by the ePRO Combi. This limit is user adjustable.
Power Factor Corrected AC Input , which optimizes energy efficiency and makes sure that the maximum amount of charging current is available from your AC source.
Intelligent 4-stage charge programs , user programmable to fit any battery type.
Fully programmable inverter , transfer switch and battery charger parameters, using the Dashboard for Windows software.
Programmable alarm relay , for optimal control of external devices like generator starting or selective load disconnection.
Freely assignable trigger input , which allows the user to control the ePRO Combi by external events.
Temperature controlled fans , to guarantee silent operation under less than full load conditions.
Temperature compensated battery charging , using the standard supplied battery temperature sensor for maximum battery lifetimes.
When installation space is at a premium , but maximum performance is required then look no further than the ePRO Combi range. With so many internal features the ePRO Combi will provide you with all the requirements for on-board power along with:
AC Input Power Boost The ePRO Combi is capable of temporarily assisting weak AC input sources when more power is needed than available (i.e. from small generators). This is beneficial when larger loads than both the generator or the inverter on their own could support; so let the ePRO Combi combine both of the AC sources for maximum load support capability.
AC Input Current Limit For those times when you have limited AC supply (i.e. portable generators), you can set the ePRO Combi to only charge at a maximum rate.
Alarm Output Relays Providing full configuration options for the alarm contacts PLUS convert external trigger commands into a number of ePRO Combi status changes.
A

Brand Enerdrive
SKU EPC-1600-12-KIT
Stockist My Generator