Category: Engel

In stock Engel ENG240W 228 Litre White Ice Box. Available in Australia from the official Engel stockist My Generator.

Engel ENG240W 228 Litre White Ice Box, 10 Years Warranty. Engel, the original high-performance roto-molded cooler was built for toughness and durability. With a full 2 inches of closed-cell foam insulation in the lid, on the sides, and the bottom, helping to retain cold and ice for up to 10 days.

Unlike the rubber gaskets used by our competitors, Engel's all silicone gaskets create a near airtight seal that is durable and will never lose its shape. The majority of independent reviews consistently rank Engel Coolers as one of the best-rotomolded coolers on the market.

Features:

""IGBC Certified Bear Resistant Container"" – molded on rear lid of the cooler
Up to 10 days Ice Retention
Dry ice compatible
Durable seamless rotationally-molded construction
First and original high-performance cooler
Warranty: 10 Years

Built for Toughness and Durability:

SingleForm HardShell – Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation – With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket – Unlike the rubber gaskets used by our competitors, Engels all silicone gaskets create a near airtight seal that is durable and will never lose its shape
Unity Latch System – Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener

Additional Technology:

TruHold Lid – Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads easy to apply, easy to clean
I-BEAM Lid Inserts – Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet – Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge – Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes – Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug – Recessed one-twist opening drain plug with lanyard hole

Note: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods.

Brand Engel
SKU ENG240W
Stockist My Generator

In stock Engel ENG320W 302 Litre White Ice Box. Available in Australia from the official Engel stockist My Generator.

Engel ENG320W 302 Litre White Ice Box, 10 Years Warranty. Engel, the original high-performance roto-molded cooler was built for toughness and durability. With a full 2 inches of closed-cell foam insulation in the lid, on the sides, and the bottom, helping to retain cold and ice for up to 10 days.

Unlike the rubber gaskets used by our competitors, Engel's all silicone gaskets create a near airtight seal that is durable and will never lose its shape. The majority of independent reviews consistently rank Engel Coolers as one of the best-rotomolded coolers on the market.

Features:

""IGBC Certified Bear Resistant Container"" – molded on rear lid of the cooler
Up to 10 days Ice Retention
Dry ice compatible
Durable seamless rotationally-molded construction
First and original high-performance cooler
Warranty: 10 Years

Built for Toughness and Durability:

SingleForm HardShell – Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation – With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket – Unlike the rubber gaskets used by our competitors, Engels all silicone gaskets create a near airtight seal that is durable and will never lose its shape
Unity Latch System – Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener

Additional Technology:

TruHold Lid – Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads easy to apply, easy to clean
I-BEAM Lid Inserts – Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet – Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge – Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes – Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug – Recessed one-twist opening drain plug with lanyard hole

Note: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods.

Brand Engel
SKU ENG320W
Stockist My Generator

In stock Engel 30 Litre White Water Cooler. Available in Australia from the official Engel stockist My Generator.

Engel 30 Litre White Water Cooler, 10 Years Warranty. Based on the original high-performance cooler, the Engel roto-molded watercooler is built for toughness and durability. With a solid 5.1cm of foam insulation, this cooler will retain the cold for days, even in the hottest environments.

Features:

5.1cm of insulation in the cooler and 10.2cm in the lid
Durable rotationally-molded construction
Side grab handles
Hinged lid
Warranty: 10 Years

Brand Engel
SKU ENGWCLW
Stockist My Generator

In stock Engel EDAC240V 240V AC/DC Converter. Available in Australia from the official Engel stockist My Generator.

Engel EDAC240V 240V AC/DC Converter, 1 Year Warranty. This is an optional accessory for the Engel F-series chest fridge/freezer models.

Compatible with:

MD14F
MD17F
MD27F
MD40F

Features:

8.3 Amps
Connects to the DC inlet

Brand Engel
SKU EDAC240V
Stockist My Generator

In stock Engel R2000IS 2000W Pure Sinewave Inverter Generator. Available in Australia from the official Engel stockist My Generator.

Engel R2000IS 2000W Pure Sinewave Inverter Generator, 4 Year Warranty. This unit boasts world class quality at an affordable price. Comprising all the features you expect in a generator today with the peace of mind that comes from owning an Engel Product. Backed by Engels no fuss 4 year warranty and supported by a network of service agents nationally you have years of trouble free operation ahead.

Features:

Compact: Portable and Easy to Handle
100% Pure Sine Wave
15 amp Outlet
Encased in Tough material
Powerful 4 Stroke Engine
Super Quiet
7 Hours Continuous Running Time (50% Capacity)
4.8 Litre Fuel Capacity
Easy Pull Start

Applications:

Caravanning & Camping
Home Backup Power
DIY Tasks
Small Events
Market Stalls, Mobile Businesses

Brand Engel
SKU R2000IS
Stockist My Generator

In stock Engel R3000IE 3500W Pure Sinewave Inverter Generator. Available in Australia from the official Engel stockist My Generator.

Engel R3000IE 3500W Pure Sinewave Inverter Generator, 4 Year Warranty. This unit boasts world class quality at an affordable price. Comprising all the features you expect in a generator today with the peace of mind that comes from owning an Engel Product. Backed by Engels no fuss 4 year warranty and supported by a network of service agents nationally you have years of trouble free operation ahead.

Features:

Compact: Portable and Easy to Handle
100% Pure Sine Wave
15 amp twin Outlet
Encased in Tough material
Powerful 4 Stroke Engine
Super Quiet
8.5 Hours Continuous Running Time (50% Capacity)
8.3 Litre Fuel Capacity
Electric Start and Easy Pull Start

Applications:

Caravanning & Camping
Home Backup Power
DIY Tasks
Small Events
Market Stalls, Mobile Businesses

Brand Engel
SKU R3000IE
Stockist My Generator

In stock Engel ENG35G 33 Litre Grey Ice Box. Available in Australia from the official Engel stockist My Generator.

Engel ENG35G 33 Litre Grey Ice Box, 10 Year Warranty. Engel, the original high-performance cooler, is roto-molded for toughness and durability. Its filled with a full 50mm of insulation in the lid, on the sides, and on the bottom, helping to retain cold and ice for up to 10 days. The all silicone gaskets create a near airtight seal that is durable and will never lose its shape.

Features:

Available in 20, 33, 45, 55, 70, 102 & 158 Litre Capacities
Ice retention for up to eight days
Dry ice compatible
Durable seamless construction
IGBC Certified Bear Resistant Container
5 Cm of insulation
Roto-Moulded shell
Draw-down latches
Re-enforced lid strong enough to sit on
Easy to empty with a large drain plug
10 Year Warranty on the Ice Box main body (cabinet)

Built for Toughness and Durability:

SingleForm HardShell – Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation – With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket – Unlike the rubber gaskets used by our competitors, Engels all silicone gaskets create a near airtight seal that is durable and will never lose its shape
Unity Latch System – Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener

Additional Technology:

TruHold Lid – Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads easy to apply, easy to clean
I-BEAM Lid Inserts – Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet – Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge – Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes – Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug – Recessed one-twist opening drain plug with lanyard hole

NOTE: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods.

Brand Engel
SKU ENG35G
Stockist My Generator

In stock Engel ENG50T 45 Litre Tan Ice Box. Available in Australia from the official Engel stockist My Generator.

Engel ENG50T 45 Litre Tan Ice Box, 10 Year Warranty. Engel, the original high-performance cooler, is roto-molded for toughness and durability. Its filled with a full 50mm of insulation in the lid, on the sides, and on the bottom, helping to retain cold and ice for up to 10 days. The all silicone gaskets create a near airtight seal that is durable and will never lose its shape.

Features:

Available in 20, 33, 45, 55, 70, 102 & 158 Litre Capacities
Ice retention for up to eight days
Dry ice compatible
Durable seamless construction
IGBC Certified Bear Resistant Container
5 Cm of insulation
Roto-Moulded shell
Draw-down latches
Re-enforced lid strong enough to sit on
Easy to empty with a large drain plug
10 Year Warranty on the Ice Box main body (cabinet)

Built for Toughness and Durability:

SingleForm HardShell – Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation – With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket – Unlike the rubber gaskets used by our competitors, Engels all silicone gaskets create a near airtight seal that is durable and will never lose its shape
Unity Latch System – Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener

Additional Technology:

TruHold Lid – Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads easy to apply, easy to clean
I-BEAM Lid Inserts – Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet – Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge – Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes – Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug – Recessed one-twist opening drain plug with lanyard hole

NOTE: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods.

Brand Engel
SKU ENG50T
Stockist My Generator

In stock Engel ENG65G 55 Litre Grey Ice Box. Available in Australia from the official Engel stockist My Generator.

Engel ENG65G 55 Litre Grey Ice Box, 10 Year Warranty. Engel, the original high-performance cooler, is roto-molded for toughness and durability. Its filled with a full 50mm of insulation in the lid, on the sides, and on the bottom, helping to retain cold and ice for up to 10 days. The all silicone gaskets create a near airtight seal that is durable and will never lose its shape.

Features:

Available in 20, 33, 45, 55, 70, 102 & 158 Litre Capacities
Ice retention for up to eight days
Dry ice compatible
Durable seamless construction
IGBC Certified Bear Resistant Container
5 Cm of insulation
Roto-Moulded shell
Draw-down latches
Re-enforced lid strong enough to sit on
Easy to empty with a large drain plug
10 Year Warranty on the Ice Box main body (cabinet)

Built for Toughness and Durability:

SingleForm HardShell – Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation – With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket – Unlike the rubber gaskets used by our competitors, Engels all silicone gaskets create a near airtight seal that is durable and will never lose its shape
Unity Latch System – Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener

Additional Technology:

TruHold Lid – Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads easy to apply, easy to clean
I-BEAM Lid Inserts – Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet – Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge – Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes – Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug – Recessed one-twist opening drain plug with lanyard hole

NOTE: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods.

Brand Engel
SKU ENG65G
Stockist My Generator

In stock Engel ENG80T 70 Litre Tan Ice Box. Available in Australia from the official Engel stockist My Generator.

Engel ENG80T 70 Litre Tan Ice Box, 10 Year Warranty. Engel, the original high-performance cooler, is roto-molded for toughness and durability. Its filled with a full 50mm of insulation in the lid, on the sides, and on the bottom, helping to retain cold and ice for up to 10 days. The all silicone gaskets create a near airtight seal that is durable and will never lose its shape.

Features:

Available in 20, 33, 45, 55, 70, 102 & 158 Litre Capacities
Ice retention for up to eight days
Dry ice compatible
Durable seamless construction
IGBC Certified Bear Resistant Container
5 Cm of insulation
Roto-Moulded shell
Draw-down latches
Re-enforced lid strong enough to sit on
Easy to empty with a large drain plug
10 Year Warranty on the Ice Box main body (cabinet)

Built for Toughness and Durability:

SingleForm HardShell – Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation – With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket – Unlike the rubber gaskets used by our competitors, Engels all silicone gaskets create a near airtight seal that is durable and will never lose its shape
Unity Latch System – Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener

Additional Technology:

TruHold Lid – Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads easy to apply, easy to clean
I-BEAM Lid Inserts – Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet – Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge – Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes – Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug – Recessed one-twist opening drain plug with lanyard hole

NOTE: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods.

Brand Engel
SKU ENG80T
Stockist My Generator

In stock Engel ENG123W 102 Litre Ice Box. Available in Australia from the official Engel stockist My Generator.

Engel ENG123W 102 Litre Ice Box, 10 Year Warranty. Engel, the original high-performance cooler, is roto-molded for toughness and durability. Its filled with a full 50mm of insulation in the lid, on the sides, and on the bottom, helping to retain cold and ice for up to 10 days. The all silicone gaskets create a near airtight seal that is durable and will never lose its shape.

Features:

Available in 20, 33, 45, 55, 70, 102 & 158 Litre Capacities
Ice retention for up to eight days
Dry ice compatible
Durable seamless construction
IGBC Certified Bear Resistant Container
5 Cm of insulation
Roto-Moulded shell
Draw-down latches
Re-enforced lid strong enough to sit on
Easy to empty with a large drain plug
10 Year Warranty on the Ice Box main body (cabinet)

Built for Toughness and Durability:

SingleForm HardShell – Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation – With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket – Unlike the rubber gaskets used by our competitors, Engels all silicone gaskets create a near airtight seal that is durable and will never lose its shape
Unity Latch System – Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener

Additional Technology:

TruHold Lid – Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads easy to apply, easy to clean
I-BEAM Lid Inserts – Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet – Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge – Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes – Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug – Recessed one-twist opening drain plug with lanyard hole

NOTE: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods.

Brand Engel
SKU ENG123W
Stockist My Generator

In stock Engel ENG165W 158 Litre Ice Box. Available in Australia from the official Engel stockist My Generator.

Engel ENG165W 158 Litre Ice Box, 10 Year Warranty. Engel, the original high-performance cooler, is roto-molded for toughness and durability. Its filled with a full 50mm of insulation in the lid, on the sides, and on the bottom, helping to retain cold and ice for up to 10 days. The all silicone gaskets create a near airtight seal that is durable and will never lose its shape.

Features:

Available in 20, 33, 45, 55, 70, 102 & 158 Litre Capacities
Ice retention for up to eight days
Dry ice compatible
Durable seamless construction
IGBC Certified Bear Resistant Container
5 Cm of insulation
Roto-Moulded shell
Draw-down latches
Re-enforced lid strong enough to sit on
Easy to empty with a large drain plug
10 Year Warranty on the Ice Box main body (cabinet)

Built for Toughness and Durability:

SingleForm HardShell – Rugged roto-molded polyethylene shell. Easy-to-clean, stain resistant
Insulation – With a full 2 inches of closed cell foam insulation in the lid, on the sides, and on the bottom, our coolers retain cold and ice for up to 10 days
ArcticVault Gasket – Unlike the rubber gaskets used by our competitors, Engels all silicone gaskets create a near airtight seal that is durable and will never lose its shape
Unity Latch System – Recessed marine-grade, adjustable draw latches with stainless steel hardware that double as a bottle opener

Additional Technology:

TruHold Lid – Reinforced non-skid lid for greater traction, stability and strength whether standing or sitting. Also available: Engel non-skid cooler pads easy to apply, easy to clean
I-BEAM Lid Inserts – Durable I-BEAM inserts allow for maximum weight-bearing strength and prevent lid warping
Cornerstone Feet – Non-skid, non-marking feet keep cooler in place while keeping your deck clean
Anvil Hinge – Integrated full-length, self-stopping rear hinge for maximum strength
DuoLock Security Holes – Dual padlock holes allow you to lock the cooler shut for bear resistance
Flick Drain Plug – Recessed one-twist opening drain plug with lanyard hole

NOTE: In order to get the maximum amount of performance out of the icebox (i.e. 8 days ice retention) it is recommended you use the 2:1 Ratio. This refers to using two thirds of the icebox for ice and one third of the icebox for your goods.

Brand Engel
SKU ENG165W
Stockist My Generator