Jeep Wrangler JL 4 Door (2018-Current) Extreme Slimline II Roof Rack Kit – by Front Runner

In stock Jeep Wrangler JL 4 Door (2018-Current) Extreme Slimline II Roof Rack Kit – by Front Runner. Available in Australia from the official Front Runner stockist My Generator.

Jeep Wrangler JL 4 Door (2018-Current) Extreme Slimline II Roof Rack Kit – by Front Runner, Limited Lifetime Warranty.

This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JL 4 door including the Slimline II tray (1425mm x 2368mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.

The JL Extreme mounting system bolts to existing mounting points on the body and factory roll bar. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels with the rack in place. The windscreen can also be lowered without any interference. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hard top itself.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

These Foot Rails allow for a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit ) to be fitted.

All Front Runner Racks are backed by a Limited Lifetime Warranty*

NOTE : This Kit cannot be used together with the soft top roof or Sky One-Touch Power top. Snorkels are not compatible with the Front Bar Roof Rack Mount in this kit.

Note : Not suitable for 4xe models. Kits for the Mojave and diesel models are available:

Jeep Wrangler JL 2Door Mojave/Diesel (2018-Current) Extreme Slimline II Roof Rack Kit
Jeep Wrangler JL 4Door Mojave/Diesel (2018-Current) Extreme Roof Rack Kit
Jeep Gladiator JT Mojave/Diesel (2019-Current) Extreme Slimline II Roof Rack Kit

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2"") to the height of the Foot or Grab-on Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2"") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2"") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

Installation Instructions for FAJL002

Installation Instructions for FAJL004

Installation Instructions for RRSTJ12

Brand Front Runner
SKU KRJW022T
Stockist My Generator