For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
Specifications
Diameter: 40mm
Capacity: 16-38mm
Shank: 16mm
Overall Length: 132mm
Popular Products
Bordo 3840-S - Countersink 90 Deg. Set 5 Piece Cross Hole For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk…
Saber 8032-S1 - Cross Hole Countersink Set HSS-CO5 Tin Coated Cross Hole Countersinks For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. The intersection of the hole and cone form the cutting edge on the tool. The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates. If this does not occur…
Saber 8034-S1 - Triple Flute Countersink Set HSS-CO5 Tin Coated Triple Flute Contersinks For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole. This may be required to allow the correct seating for a countersunk head screw or to provide…
Bordo 3843-40 - Countersink 90 Deg. 40mm Three Flute For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole. This may be required to allow the correct seating for a countersunk head screw or to provide the lead in…
Bordo 3841-15 - Countersink 60 Deg. 15mm Cross Hole For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk…
Bordo 3840-15 - Countersink 90 Deg. 15mm Cross Hole For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk…
Bordo 3840-6.35 - Countersink 90 Deg. 6.35mm Cross Hole For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk…
Bordo 3841-20 - Countersink 60 Deg. 20mm Cross Hole For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk…
Bordo 3840-10 - Countersink 90 Deg. 10mm Cross Hole For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk…
Bordo 3840-20 - Countersink 90 Deg. 20mm Cross Hole For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk…
Bordo 3840-30 - Countersink 90 Deg. 30mm Cross Hole For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk…
Bordo 3841-10 - Countersink 60 Deg. 10mm Cross Hole For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk…
Best Seller Today
Saber 8032-S1 - Cross Hole Countersink Set HSS-CO5 Tin Coated Cross Hole Countersinks For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. The intersection of the hole and cone form the cutting edge on the tool. The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates. If this does not occur…
