Bootlace Terminal Kit & Crimper
The Bootlace Pin Terminal Kits contain the most common bootlace pins packed with a crimper tool in a plastic box.
Kit contains 100 pieces of the following: Bootlace Pins
0.5mm² White
0.75mm² Blue
1mm² Red
1.5mm² Black
2.5mm² Grey
4mm² Orange
Bootlace Pins – Twin Pre-Insulated
2 x 0.75mm² Grey
2 x 1mm² Red
2 x 1.5mm² Black
2 x 2.5mm² Blue
Popular Products
PKTool PT91505 - Waterproof Wire Connector & Fuse Assortment - 240 Piece Waterproof Connector Plugs 1 Pin Male Housing & Insert 2pc Female Housing & Insert 2pc Male Terminal 2pc Female Terminal 2pc Silicon Rubber Cable Seal 4pc 2 Pin Male Housing & Insert 3pc Female Housing & Insert 3pc Male Terminal 6pc Female Terminal 6pc Silicon Rubber Cable Seal 12pc 3 Pin Male Housing & Insert 3pc Female Housing…
Cabac HNKE5 - Crimper - Bud.ratchet 0.5 - 16.0mm Bootlace Crimper 0.5-16.0MM² Low Cost Low cost ratchet crimper for bootlace ferrules (BLP) and uninsulated sleeves 0.5-16 mm². Adjustable ratchet - releasable ratchet. Length: 230 mm Weight: 400 g
Mayhew 62277-MHW - Brass Punch Set 4 Piece Manufactured from high quality Brass Used for non-marring applications Sparking Inhibiting Popular, versatile 4 Pc Kit consists of drift, solid and pin punches Drift Punch used for knocking out frozen pins and can be used to roughly align holes through which rivets, pins or bolts will be inserted Solid Punch used for loosening frozen or tight pins and keys, knocking…
Cabac HF2 - Crimper - 230mm - Budget Brass Terminal Crimper Brass Terminal Crimper 0.75-6MM² Roll Crimp This low cost brass terminal crimper is designed to crimp quick connectors type (QCB or MTB type) 0.75 - 6mm². The crimp achieves a roll crimp that supports the insulation and crimps the wire. This type of crimper is not suitable for flag terminals. Length: 230mm Weight: 500g
Cabac HNKE11 - Bootlace Ferrule Crimper Die- Less Bootlace Ferrule Crimper 4MM -16MM² The HNKE11 tool is a large tool in the die-less tool range covering 4 to16mm². The principal of the tool is that it has four faces that simultaneously move inward as the tool is closed, creating a square crimped pin with serrations. These serrations assist with the grip of the pin in the…
Cabac HNKE7 - Pin Crimper 16 - 35mm BOOTLACE CRIMPER-16-35mm sq Ratchet crimper for crimping bootlace ferrules (BLP) and uninsulated sleeves 16-35 mm2. Length: 220 mm Weight: 430 g
Cabac HNKE3 - Bootlace Crimper 0.14 - 2.5mm2 Small Boot Lace Crimper 0.14-2.5MM² This small boot lace crimping tool is designed to crimp ultra small boot lace terminals from 0.14-2.5mm². Unique 'ribbed' jaws crimp a roughened surface on to the ferrule to increase the 'locking' of the terminal into the installation. This tool is ratchet controlled for crimp consistency, and has an eight position pressure adjustment. Jaw positions:…
Cabac HNKE12 - Bootlace Crimper/Stripper Copper Lug - Hand Crimper - 1.5 - 10 mm2 - Precision Precision ratchet lug crimper for indent crimping of copper lugs 1.5-10 mm2. Ratchet operation ensures correct crimp and reduced hand effort. Length 235mm Weight: 480g
Milwaukee M18HCCT1370B - 18V FORCE LOGIC 137kN Inline Utility Crimper (Tool Only) The M18™ FORCE LOGIC™ 137kN Inline Utility Crimper makes crimping easy. The battery-powered crimper's unique in-line design and centre-balanced grip allows you to use it with one hand, reducing peak muscle effort. Featuring a Quick Release with Push-to-Close pin design that provides easy access around splices and joins, and a 350° rotating head ensures quick alignment on the job. The…
Cabac KTC1 - Crimping Tool Pre-Insulated Terminal Crimper - Budget The budget pre-insulated terminal ratchet style crimper is for use with red, blue and yellow pre-insulated terminals. The ratchet operation ensures correct crimp at reduced hand effort. Note: When crimping flexible conductors in yellow terminals the maximum capacity of the tool is 6mm². Length: 230mm Weight: 540g
Cabac HN2 - Ratchet Crimper 1 - 10mm2 Budget Copper Lug - Hand Crimper - 1.5 - 10 mm2 - Low Cost Low cost ratchet lug crimper. Indent crimper for copper lugs 1.5-10 mm2. Ratchet operation ensures correct crimp and reduced hand effort. Length: 260 mm Weight: 540g
Alemlube L20040PA - Diesel Refuelling Storage & Dispensing Kit - 200L Lockable The new Alemlube lockable diesel refuelling storage & dispensing kits have been designed adopting the very latest diesel fuel tank design cues resulting in a practical, user friendly shape that is easy to handle and versatile in its application. Consisting of a heavy duty, robustly constructed, locally produced polyethylene tank with built in nozzle holster and a dispensing kit containing…
Best Seller Today
Mayhew 62277-MHW - Brass Punch Set 4 Piece Manufactured from high quality Brass Used for non-marring applications Sparking Inhibiting Popular, versatile 4 Pc Kit consists of drift, solid and pin punches Drift Punch used for knocking out frozen pins and can be used to roughly align holes through which rivets, pins or bolts will be inserted Solid Punch used for loosening frozen or tight pins and keys, knocking…
