Die- Less Bootlace Ferrule Crimper 4MM -16MM²
The HNKE11 tool is a large tool in the die-less tool range covering 4 to16mm².
The principal of the tool is that it has four faces that simultaneously move inward as the tool is closed, creating a square crimped pin with serrations. These serrations assist with the grip of the pin in the terminal blocks.
Self adjusting tool enables crimp over large range
Ratchet controlled for crimp consistency
6 adjustment positions
Length: 210mm
Weight: 520g
Popular Products
Cabac HNKE10 - Bootlace Crimper 0.75 - 10mm2 Dieless Die-less Bootlace Ferrule Crimper 0.75-10MM² The HNKE10 tool is the mid range tool in the die-less tool range, covering 0.75to 10mm². The principal of the tool is that it has four faces that simultaneously move inward as the tool is closed, creating a square crimped pin with serrations. This action creates a self adjusting tool, which crimps over a large…
Cabac BLPKIT2 - Bootlace Pin Kit Plus HNKE5 Bootlace Terminal Kit & Crimper The Bootlace Pin Terminal Kits contain the most common bootlace pins packed with a crimper tool in a plastic box. Kit contains 100 pieces of the following: Bootlace Pins 0.5mm² White 0.75mm² Blue 1mm² Red 1.5mm² Black 2.5mm² Grey 4mm² Orange Bootlace Pins - Twin Pre-Insulated 2 x 0.75mm² Grey 2 x 1mm² Red 2…
Cabac HNKE3 - Bootlace Crimper 0.14 - 2.5mm2 Small Boot Lace Crimper 0.14-2.5MM² This small boot lace crimping tool is designed to crimp ultra small boot lace terminals from 0.14-2.5mm². Unique 'ribbed' jaws crimp a roughened surface on to the ferrule to increase the 'locking' of the terminal into the installation. This tool is ratchet controlled for crimp consistency, and has an eight position pressure adjustment. Jaw positions:…
Cabac HNKE5 - Crimper - Bud.ratchet 0.5 - 16.0mm Bootlace Crimper 0.5-16.0MM² Low Cost Low cost ratchet crimper for bootlace ferrules (BLP) and uninsulated sleeves 0.5-16 mm². Adjustable ratchet - releasable ratchet. Length: 230 mm Weight: 400 g
Cabac HNKE7 - Pin Crimper 16 - 35mm BOOTLACE CRIMPER-16-35mm sq Ratchet crimper for crimping bootlace ferrules (BLP) and uninsulated sleeves 16-35 mm2. Length: 220 mm Weight: 430 g
Matson MA2342 - Hand Crimping Tool 1.25-16mm2 1.5, 2, 6, 10 and 16MM2 cable sizes Ratchet handle system Sturdy pressed steel construction Indeal for small cable joiner and lug crimping Length: 280MM Weight: 0.43kg
Cabac HF2 - Crimper - 230mm - Budget Brass Terminal Crimper Brass Terminal Crimper 0.75-6MM² Roll Crimp This low cost brass terminal crimper is designed to crimp quick connectors type (QCB or MTB type) 0.75 - 6mm². The crimp achieves a roll crimp that supports the insulation and crimps the wire. This type of crimper is not suitable for flag terminals. Length: 230mm Weight: 500g
Milwaukee M18HCCT1370B - 18V FORCE LOGIC 137kN Inline Utility Crimper (Tool Only) The M18™ FORCE LOGIC™ 137kN Inline Utility Crimper makes crimping easy. The battery-powered crimper's unique in-line design and centre-balanced grip allows you to use it with one hand, reducing peak muscle effort. Featuring a Quick Release with Push-to-Close pin design that provides easy access around splices and joins, and a 350° rotating head ensures quick alignment on the job. The…
Cabac HN2 - Ratchet Crimper 1 - 10mm2 Budget Copper Lug - Hand Crimper - 1.5 - 10 mm2 - Low Cost Low cost ratchet lug crimper. Indent crimper for copper lugs 1.5-10 mm2. Ratchet operation ensures correct crimp and reduced hand effort. Length: 260 mm Weight: 540g
Milwaukee M18HCCT120C - 18V FORCE LOGIC 120kN Utility Crimper (Tool Only) The M18™ FORCE LOGIC™ 120kN Utility Crimper is the easy way to crimp. Engineered to reduce weight and improve balance, the crimper delivers up to 120kN output force to handle the toughest jobs, Alignment is simple and easy with a 350Ëš rotating head with red alignment marks. Predictive Force Monitoring (PFM™) constantly measures force output to deliver consistent speed that…
Cabac K28 - Ratchet Lug Crimper 6 - 25mm2 Copper Lug Crimper 6-25mm2 Robust ratchet crimper that crimps a huge range of copper lugs from 6mm2 to 25mm2. The crimp is a ‘W’ crimp, which allows for the large range. High leverage handles make crimping effort easier. Ratchet operation ensures a correct crimp. Length: 360mm Weight: 800g
Cabac K05 - Crimper 6 - 50mm2 Copper Lugs Crimper, 6-50mm2 – Hexagonal Hexagonal copper lug crimper with crimp range 6-50mm2. Dies are self-contained and rotating, so they cannot be misplaced. Tool has an over-centre action to ensure complete crimp. Length: 390mm Weight: 1.3kg
Best Seller Today
Cabac HNKE3 - Bootlace Crimper 0.14 - 2.5mm2 Small Boot Lace Crimper 0.14-2.5MM² This small boot lace crimping tool is designed to crimp ultra small boot lace terminals from 0.14-2.5mm². Unique 'ribbed' jaws crimp a roughened surface on to the ferrule to increase the 'locking' of the terminal into the installation. This tool is ratchet controlled for crimp consistency, and has an eight position pressure adjustment. Jaw positions:…
