On sale Cabac TEL1TLV2 – Power Point Tester V2. Power Point Tester
A handy low-cost unit that tests a power outlet for polarity, earth connection, incorrect wiring and tests earth leakage circuit breakers.
To use the unit, simply plug in and compare the neon lights on the front panel with the diagram on the front of the instrument. The Power Point Tester will also test the wiring on the power point.
To test an earth leakage circuit breaker, first check the wiring as above, then turn the rotary switch slowly through the range of mA settings. The RCD should trip before the maximum setting of 35mA is reached.
Low cost for a big result
Very simple and easy to use
Rugged and compact design
Identifies six wiring conditions
Integral plug fits straight into the socket
Push button RCD trip test
Compliance and Safety
Safety: Sealed unit, with 3 pin plug. No exposed test leads.
EMC: Meets EN55022, CE, C√
Feature
Range
Voltage Range
230V±10%
Test Conditions
Correct, Active/Neutral Reverse Active/Earth Reverse, No Neutral Live Earth, No Earth No Active
ELCB Test
30mA Trip 10, 15, 20, 25, 30, 35mA
Quiescent Current
1.75mA
Each unit is supplied complete on a slide blister with instructions.. Browse our range of CABAC products available on sale in Australia.
Tools and Hardware Australia
Cabac T2732 Insulation Tester Australia On sale Cabac T2732 - Insulation Tester. Analogue Insulation Tester A well priced, accurate general purpose analogue insulation tester suitable for rugged environments. The operating panel and display are colour coded and clearly laid out. The unit fits into a folding case with a compartment for leads and accessories. The meter is equipped with a lock down button and a lead resistance zero operating knob. It tests continuity from 3 to 500Ω, AC voltage to 600V and insulation at voltages…
Cabac T2712EL Rcd Tester Australia On sale Cabac T2712EL - Rcd Tester. Digital RCD Tester 240V This compact hand held RCD tester is designed for professional use to obtain accurate values of 'Trip Time' with the selection on a dial switch of the trip current. Resistors are used to pass the trip current between earth and active therefore a correction factor in percentage is available on the display for adjustment according to the line voltage. The trip time is measured to a maximum of 3.000…
Cabac T1800 Resistance Tester Analog Mega Installation Australia On sale Cabac T1800 - Resistance Tester - Analog Mega Installation. T1800 Analogue Insulation Tester A good quality general purpose analogue insulation tester packed in a compact casing. The display is clearly laid out and the operating panel is colour coded. The casing has a compartment on one side for packing leads and accessories. The unit is equipped with a lock down operating button. Ideal for testing an installation for continuity, AC voltage and insulation at voltages 250, 500, and…
Cabac MONKEY Blue Level Stencil Australia On sale Cabac MONKEY - Blue Monkey Level Stencil. Features A clever self-leveling stencil to assist with fitting C-brackets for plug points and light switches Fast, clean and accurate installations every time Easy to position and mark C-bracket cut-out Vertical and horizontal level indication Instructions Measure the position desired for the plug point and mark the centre point of the hole you wish to cut for a C-bracket. Check for studs, metal brackets and power cords behind the plaster board…
Cabac CTM825 Blue Monkey Tape 8m Australia On sale Cabac CTM825 - Blue Monkey Tape 8m. CABAC's CTM825 tape measure is specifically designed here in Australia, for Australian electrician's. It is a high quality metric tape, which includes a GPO cut out template in the blade graphics. It also incorporates a quick reference guide to a 300mm GPO height and 1250mm light switch height. The blade is double sided allowing the user to do horizontal and vertical measurements. The blade is protected by a tough nylon coating…
Cabac T8229 Digital Multimeter 5 In 1 Auto Range Australia On sale Cabac T8229 - Digital Multimeter 5 In 1 Auto Range. 5 in 1 Auto Range Digital Multimeter With Alarm CATIII 600V Sound & light warning for incorrect insertion of leads Temperature F° or C° Auto range / Manual range Data hold with backlight Maximum value measurement Auto power off Display: 3999 counts Continuity check with buzzer Diode test Rugged case with soft boot Compliance and Safety: IEC61010 - 1 CATII 1000V/CATIII 600V Feature Range Accuracy AC/DC Voltage 400m/4/40/400/1000V…
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.