Generac PY000A000AY – Transfer Switch – 70A 230V 50Hz Generac Australia

Description

On sale Generac PY000A000AY – Transfer Switch – 70A 230V 50Hz. Features
Generac Transfer switches are designed for use with single-phase and 3-phase 50 Hz generators. The transfer switches are certified for IEC 60947-6-1, the transfer switch standard, where electronically operated and mechanically held contacts are required for safety.
Generac Transfer Switches are available with steel enclosures for 45 and 70 amp single-phase models. The enclosure, RAL 7035 painted, is certified to IEC IP66. The Contactors equipped comply with a wide range of certificates and marking, including the CE mark. The controller at the generator senses and controls the timing, exercising and transfer commands.
Functions
All timing and sensing functions originate in the generator controller.
Utility voltage dropout: 60%
Timer to generator start: 10 second factory set, adjustable between 2-1500 seconds by a qualified dealer*
Engine warm up delay: Five seconds
Standby voltage sensor : 60% for five seconds
Utility voltage pickup: >80%
Re-transfer time delay: 15 seconds
Engine cool-down timer: 60 seconds
Exerciser: 12 minutes every 7 days
The transfer switch can be operated manually without power applied.*When used in conjunction with units utilizing Evolutionâ„¢ and Nexusâ„¢controls
Specifications
Rated Current (AC-1) (690V)
70A @ 40 °C
60A @ 60 °C
50A @ 70 °C
230V, 1Ph+N, 50Hz
Open transition
Enclosure Type: IP66
Terminal size
Power section: 35mm2 (Ph+N)
Control section: 1.5 mm2
Admissible Terminal Connectors
Power section: End Sleeves
Control section: End Sleeves
Overall Dimensions: 500 x 400 x 200mm
Weight: 12kg. Browse our range of Generac products available on sale in Australia.