HiKOKI KC36DCHRZ 36V Brushless 2 Piece Drill/Driver Combo Kit DC

Description

On sale HiKOKI KC36DC(HRZ) – 36V Brushless 2 Piece Drill/Driver Combo Kit DC (2 x 5/2.5Ah). Includes
DV36DC – 36V Brushless Impact Driver Drill
WH36DC – 36V Brushless 1/4″ Impact Driver
2 x BSL36A18 – MultiVolt Battery (A)
UC18YSL3 – Rapid Charger
Stackable Carry Case
DV36DC – 36V Brushless Impact Driver Drill
Whether you’re taking on a big job or tightening or loosening screws, the HiKOKI 36V Brushless Impact Driver Drill DV36DC will help you get the job done faster and easier! Featuring Reactive Force Control (RFC), durable design resistant to heat generation and side handle that can be mounted in 11 different positions.
RFC (Reactive Force Control) – When the gyroscope sensor built in the controller detects a predetermined angle, the motor stops automatically to prevent excessive jerking of the tool
LED Light warning signals occur with RFC and when the tool is overburdened or overheats
Due to the highly durable design that is resistant to heat generation, it is difficult to stop even during continuous work.
The side handle can be mounted in 11 different positions to improve workability.
Compatible with the HiKOKI MultiVolt battery
Voltage: 36V
Motor type: Brushless
Switch type: Trigger
Drill chuck type: Keyless metal chuck
Chuck capacity: 1.5-13mm
Light LED: White
Clutch stages: 22 (Torque 1.5 -8.0Nm)
Maximum Torque Hard Joint: 155Nm
Maximum Torque Soft Joint: 100Nm
No load speed – low: 0-550rpm
No load speed – high: 0-2200rpm
Capacity
Brick & Masonary: 22mm
Steel & Aluminium: 20mm
Wood hole saw: 118mm
Wood self feed bit: 95mm
Small screw: M6
Wood screw: M16 x 100mm
RFC (Reactive Force Control): Yes
Forward / Reverse Mode: Yes
Dimensions (LxHxW) including the battery: 190 x 267 x 89mm
Weight: 2.1kg
Battery Compatible with HiKOKI MultiVolt battery
Includes
Side handle
Hook
Driver bit
WH36DC – 36V Brushless 1/4″ Impact Driver
High torque impact driver
5 Modes (Max, Bolt, Bolt Single, Soft, Self Drilling)
IP56 dust & water resistance*
Triple Hammer for high efficiency
3 LED light provides more visibility in dark and compact areas
Power: 36V
Motor: Brushless
Capacity
Small screw*¹: 4 to 10 mm (5/32″ to 3/8″)
Ordinary bolt: 5 to 18 mm (3/16” to 23/32”)
High tension bolt: 5 to 14 mm (3/16” to 9/16”)
Self drilling screw: 3.5 to 6 mm (1/8″ to 1/4″) in diameter
Tightening torque*²
Power mode: 215 Nm
Bolt mode: 215 Nm
Soft mode: 76 Nm
No-load speed (with a battery fully charged at 20°C)
Power mode: 0 to 3,400 min-¹
Bolt mode: 0 to 2,900 min-¹
Bolt single mode: 0 to 2,900 min-¹
Soft mode: 0 to 900 min-¹
Self drilling screw mode: 0 to 3,700 min-¹
Impact rate (with a battery fully charged at 20°C)
Power mode: 0 to 4,100 min-¹
Bolt mode: 0 to 4,100 min-¹
Bolt single mode: 0 to 4,100 min-¹
Soft mode: 0 to 2,000 min-¹
Self drilling screw mode: 0 to 2,200 min-¹
Drive: 6.35 mm (1/4”) bit holder
Type of switch: Variable speed trigger switch with forward/reverse changeover lever (with brake)
LED light: White LED (Always ON, Light only SW-ON, and Always OFF)
Weight: 1.6 kg
Dimensions (L x H ): 114 x 241 mm. Browse our range of HIKOKI products available on sale in Australia.