Stronghand WAC35-SW – Angle Clamp – 3 Axis Swing Away Arm – Small Stronghand Australia

Tools and Hardware Australia

• Stronghand WAC45-SW - Angle Clamp - 3 Axis Swing Away Arm - Large Stronghand Australia

  

  On sale Stronghand WAC45-SW - Angle Clamp - 3 Axis Swing Away Arm - Large. Hold parts in position during cool down to minimize distortion due to contraction. Two Quick Acting Screws. “swing away” the 3rd Axis arm for quick and easy part removal. 3-Axis Fixture Quick Acting Screw two stand-offs “Swing Away” Arm two Magnetic Rest Blocks Slot Size: 51mm Slot Width: 11mm Miter Joints: 125mm Jaw Length: 135mm T-Clearance: 103mm Jaw Height: 64mm Height: 245mm Weight: 16kg. Browse…
• Stronghand WAC35D - Angle Clamp - 2 Axis Deluxe/Quick Action Screw Stronghand Australia

  

  On sale Stronghand WAC35D - Angle Clamp - 2 Axis Deluxe/Quick Action Screw. Made with machined cast iron. Featuring these improvements: Machined outside faces – usable for upright joint Stand-off increases access Quick acting screw on deluxe models. Quick Acting Screw 2x Standoffs 2x Magnetic Rest Blocks Machined on Outside Faces Slot Size (A): 40mm Slot Width (B): 11 mm Miter Joints (C): 95mm Jaw Length (D): 107mm T-Clearance (E): 64mm Jaw Height (F): 35mm Weight: 4.5kg. Browse our range of…
• Stronghand WAC45 - Welders Clamp Angle 2-AXIS Large Stronghand Australia

  

  On sale Stronghand WAC45 - Welders Clamp Angle 2-AXIS Large. Made with machined cast iron. Featuring these improvements: Machined outside faces – usable for upright joint Stand-off increases access Quick acting screw on deluxe models. Quick Acting Screw 2x Standoffs 2x Magnetic Rest Blocks Machined on Outside Faces Slot Size (A): 51mm Slot Width (B): 11 mm Miter Joints (C): 125mm Jaw Length (D): 135mm T-Clearance (E): 103mm Jaw Height (F): 64mm Weight: 10.0kg. Browse our range of Stronghand products available…
• Stronghand PPD100 - Dual Axis Puller Pliers W /Hammer Head 715mm Stronghand Australia

  

  On sale Stronghand PPD100 - Dual Axis Puller Pliers W /Hammer Head 715mm. An essential tool for the die-maker, maintenance craftsman, and auto body, or auto repair shop mechanic. Ideal for the pulling, pushing or ramming of dowel pins, threaded inserts, and pipes. The Pull Rod automatically swings to align with the jaw opening (or part size) for a straight pull, without side swaying. Mount the Pull Rod at the rear of the swing handle for in line pulling, or…