Zircon E50 Stud Finder Australia

Description

On sale Zircon E50 – Stud Finder. All-New Deep-Scanning Stud Finder with Patented Pinch Grip Design, New SpotLite® Pointer, and WireWarning® Detection.
The StudSensorâ„¢ e50 quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings.
Its easyto-read display screen indicates stud edges, the patented SpotLite® Pointer shines a beam of light on the wall to identify the target, and WireWarning® detection indicates the presence of live AC voltage.
Its new patented pinch grip and contoured shape provide an easy, secure hold in either hand, at any angle.
Features
StudScan mode locates the edges of wood or metal studs up to ¾ inch (19 mm) deep
DeepScan® mode doubles the scanning depth to 1½ inches (38 mm)
Easy-to-read LCD display indicates when a stud edge is approached
Updated SpotLite® Pointer shines an arrowshaped light on the wall to mark the target
WireWarning® detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep
Should scanning begin over a stud, Zircon’s patented “over-the-stud” indication alerts the user to start the scan in a new location
Patented TruCal® technology indicates when the tool is calibrated and ready
Specifications
Dimensions: 169 mm H x 71 mm W x 43 mm D
Weight: 123 g without battery
Battery Type: 9V alkaline, required
Position Accuracy*:
Up to a depth of 19 mm: Typically within 3 mm using the dual scan and mark procedure
Up to a depth of 38 mm: Typically within 5 mm using the dual scan and mark procedure
Depth*
StudScan mode: Up to 19 mm
DeepScan® mode: Up to 38 mm
WireWarning® Position Accuracy*: Typically 90-250 V at 50-60 Hz within 152 mm of a hot unshielded wire
WireWarning® Depth*: In typical wall with Romex™ wiring, wire can be detected up to 51 mm deep
Operating Temperature: -7° to 41°C
Storage Temperature: -29° to 66°C
Humidity: 5-90% RH (non-condensing)
Water Resistance: Splash and water resistant, not waterproof
*NOTE: Sensing depth and accuracy can vary due to moisture, content of materials, wall texture, paint, etc. Not recommended for use on lath and plaster. Indoor use only.. Browse our range of ZIRCON products available on sale in Australia.