Tag: CTEK Stockist Australia

In stock CTEK Lithium XS 12V 5A Battery Charger. Available in Australia from the official CTEK stockist My Generator.

CTEK Lithium Ion 12V 5A Battery Charger, 5 Year Warranty. The only charger youll ever need for LiFePO4. Simple Lithium charging. The LITHIUM XS CTEK Battery Charger is an advanced microprocessor controlled charger and maintainer specially designed for Lithium-Ion Phosphate (LiFePO4) batteries.

The LITHIUM XS CTEK Battery Charger is specially designed for Lithium-Ion Phosphate (LiFePO4) batteries. With up to 5A of charge current available, it can charge LiFePO4 batteries from 5Ah to 60Ah and maintain up to 120Ah. Its easy to use just connect it and charging starts immediately. Theres no need to disconnect your battery and any low voltage protection electronics will be reset automatically. The LITHIUM XS is a connect and forget charger with 8 charging steps, a testing sequence that tells you if the battery can take and retain the charge, a unique maximization step to restore full capacity and patented maintenance charging for maximum performance, even after months of inactivity.

Easy to use just connect and forget
Unique 8 step charging for maximum performance and extended life
Safe spark free operation
Exceptionally clean voltage and current delivery with no surges or spikes
5-year warranty

SAFETY INSTRUCTIONS

Brand CTEK
SKU LITHIUMXS
Stockist My Generator

In stock CTEK Eyelets M8 – 8.4mm 400mm Cables & 15A Fuse – Indicating. Available in Australia from the official CTEK stockist My Generator.

Checking and charging for hard to reach batteries

The INDICATOR Eyelet connector is ideal for charging and checking batteries that are difficult to get to or hidden. The traffic light system shows your batterys charge status simply and clearly. Connect the eyelet terminals to the battery, check the status, then plug the connector into your CTEK charger if the battery needs charging. It comes with a 2-year warranty.

55cm cable length
Comes in two sizes to fit different battery terminals perfectly
15A fuse
Splash and dust proof (IP65)

Brand CTEK
SKU 56-382
Stockist My Generator

In stock CTEK SmartPass 120S DC/DC Power Management System (120A). Available in Australia from the official CTEK stockist My Generator.

CTEK SmartPass 120S DC/DC Power Management System (120A), 2 Year Warranty. Smartpass 120S charges and supplies the service battery and equipment with 120A, separates critical equipment from non-critical equipment ensuring that radio, emergency lights and navigation systems always have power.
Power management system for starter and service batteries – Separate, prioritize and boost batteries and equipment
Smartpass 120S is a 120A Power Management Solution which distributes, controls and maximises the available energy from your alternator to power service batteries and consumers. SMARTPASS 120S handles all 12V batteries between 28-800Ah. The Smartpass 120Ss Battery Guard function ensures that critical equipment such as radio, emergency lights and navigation systems always have power and take priority when the voltage on the service battery is low disconnecting non-critical consumers. The units Battery Guard will protect your service battery from total discharge and built in over temperature protection reduces charge current before the battery temperature gets too high. SMARTPASS 120S is compatible with the D250SA and D250SE 20A on board chargers.

Smart alternator compatible
Delivers 120A for quick recharge of batteries 28-500Ah
Compatible with D250SA and D250SE for the ultimate 140A power management solution
Prioritizing critical consumers and supplies consumers directly from the alternator
Start assistance function
Battery separation eliminates diodes and VSR relays
Fully automatic
Maximizes battery life
Battery Guard to protect your secondary battery from total discharge
Dynamic over current protection to handle temporary inputs and outputs of up to 350A for fast charging
Battery temperature protection for added safety
Splash and dust proof (IP65)
2-year warranty

SAFETY INSTRUCTIONS

Brand CTEK
SKU 40-289
Stockist My Generator

In stock CTEK D250SE 12V 20A DC/DC Battery Charger. Available in Australia from the official CTEK stockist My Generator.

CTEK D250SE 12V 20A DC/DC Battery Charger, 2 Year Warranty. With award winning Swedish technology, the dual input D250SE allows you to enjoy your vehicle more with maximized battery capacity as the ideal charger for vehicles without access to a mains power supply.
Dual input 20A charger with selectable charge voltages – Enjoy more and relax
The D250SE is a fully automatic, 5 step charger that supplies up to 20A of power to any 12V lead-acid or lithium* service battery from 40300Ah. It has selectable charge algorithms for AGM and lithium* batteries and can use power through its dual input from alternator, solar panel and wind power. When the service battery is fully charged, the D250SE will automatically redirect maintenance charge power to the starter battery. The D250SE can maintain a stable output up to 20A to vehicles fitted with smart ECU controlled alternators and also has a temperature sensor for optimised charging, regardless of weather conditions. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)

20A fully automatic temperature compensated charging for batteries from 40-300Ah while youre on the move
Dual input (solar and alternator in parallel)
Smart alternator compatible
Selectable lithium* and lead-acid mode
Solar panel regulator with Maximum Power Point Tracking (MPPT)
*) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)
Battery separation replacing diodes and VSR relays
Selectable AGM option 14.4V or 14.7V
Maximised charging for better battery life and performance
Temperature sensor to compensate for hot or cold conditions
Splash and dust proof (IP65)
Compatible with SMARTPASS 120 for the ultimate 140A power management solution
2-year warranty

SAFETY PRECAUTIONS

Brand CTEK
SKU 40-315
Stockist My Generator

In stock CTEK Comfort Indicator Cigarette Plug, up to 10A. Available in Australia from the official CTEK stockist My Generator.

CTEK Comfort Indicator Cigarette Plug, up to 10A, 2 Year Warranty . Provides an indication of battery charge and charging port without the need to lift the bonnet.

Suits :

XC0.8
XS0.8
MXS3.8
MXS5.0
MXS7.0
MXS10

Brand CTEK
SKU 56-870
Stockist My Generator

In stock CTEK XC 0.8 6V 800mA 4 Stage Battery Charger. Available in Australia from the official CTEK stockist My Generator.

CTEK XC 0.8 6V 800mA Battery Charger, 5 Year Warranty. The XC 0.8 can give your vintage car a new lease of life. And, as you can keep the charger permanently connected in its maintenance mode, youre always ready to get out on the road.

The XC 0.8 is a compact 4 step 6V charger that delivers 0.8A and charges and maintains 6V batteries from 1.2-100Ah. Its simple to use and you can follow the whole charging process on the clear, easy to read display. After charging, the XC 0.8 will automatically switch to its maintenance phase using CTEKs patented pulse charging, which is the most efficient mode if a battery is connected for long periods, so the charger can be permanently connected to your vehicle.

Charges 6V batteries from 1.2-100Ah
Fully automatic connect and forget 4 step charging
Patented desulphation function
Comes with Connect Eyelet connectors and Connect – Clamp connectors
5-year warranty

SAFETY INSTRUCTION

Brand CTEK
SKU XC0.8
Stockist My Generator

In stock CTEK MXTS40 12/24V 40/20A Battery Charger. Available in Australia from the official CTEK stockist My Generator.

CTEK MXTS40 12/24V 40/20A Battery Charger, 2 Year Warranty. The MXTS 40 is the all in one battery charging, maintenance and support station thats essential equipment for 12V and 24V vehicle workshops and showrooms. Its easy to use and electronically safe, with rapid charging for all types of batteries.

The MXTS 40 has both 40A/12V and 20A/24V output, and provides selectable constant voltage settings to avoid ECU damage due to voltage fluctuation during programming. As well as the 8 step charge progress display, the MXTS 40 also has an easy to read OLED display to give you clear readouts of key charge parameters, including current, voltage and amps charged. It has a Recond mode for reconditioning deeply discharged batteries and a temperature sensor for optimised charging regardless of weather conditions. The MXTS 40 has been designed to protect vehicle electronics and is housed in heavy duty polycarbonate for rough environments. It can be used with the optional Wall Hanger Pro and Trolley Pro for secure storage and maximum portability.

Charges 12V batteries from 20-1200Ah and Charges 24V batteries from 10 600Ah
Recond program
Temperature sensor to compensate for cold conditions
Easy to read OLED display
Comes with heavy duty clamps and high quality detachable 2.5m charge cables
Electronically safe multi step rapid charging
40A/12V and 20A/24V output
IP20 classified
Safe spark free operation
Reverse polarity protected
Short circuit proof
2-year warranty

SAFETY INSTRUCTION

Brand CTEK
SKU MXTS40
Stockist My Generator

In stock CTEK MXTS 70/50 12/24V 70/50A Battery Charger. Available in Australia from the official CTEK stockist My Generator.

CTEK MXTS 70/50 12/24V 70/50A Battery Charger, 2 Year Warranty. The MXTS 70/50 is a powerful, state of the art workshop charger developed specifically for all 12V and 24V lead acid batteries, including AGM and EFB Stop/Start types.
The MXTS 70/50 is a fully automatic 8 step charger that delivers selectable 50A/12V or 50A/24V to batteries from 20-1,500Ah (for 12V) and 20-1,500Ah (for 24V), with 50A of constant power supply in 12V and 24V mode. In 12V mode, up to 70A of power is automatically available for temporary high loads. Features include battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for reconditioning deeply discharged batteries and a built in temperature sensor for optimised charging.
Features:

Selectable power supply program for constant voltage output
Patented float/pulse maintenance charging
Recond function
Heavy duty 6m detachable charge cables and clamps
LED displays for charging, charge voltage, current, charge time and energy indication
Fully automatic 8 step charging
Selectable modes for optimal battery size adaptation.
Patented desulphation function
Temperature sensor for optimised charging
Heavy duty aluminium housing (IP20 classified)
Compatible with Pro accessories.
Safe spark free operation
Reverse polarity protected
Short circuit proof
2-year warranty

SAFETY INSTRUCTIONS

Brand CTEK
SKU MXTS70
Stockist My Generator

In stock CTEK XLR Comfort Connector. Available in Australia from the official CTEK stockist My Generator.

CTEK XLR Comfort Connector, 2 Year Warranty. The CONNECT XLR adapter cable lets you easily connect your CTEK charger to the XLR socket on equipment with lead acid batteries, such as 24V powered wheelchairs and mobility scooters. The cable can be used with all chargers that have the connect contact, as well as the MXT 4.0. It comes with a 2-year warranty.

Safe and stable connection between CTEK chargers and XLR input sockets
Ideal for all CTEK chargers with CONNECT contacts
40cm cable length
Cable Red/Black, AWG 16 (1.3mm2)
Maximum current 10A
XLR 3-pin male, nylon body
CONNECT standard CTEK 2-pin female, nylon/rubber body

Brand CTEK
SKU 56-867
Stockist My Generator

In stock CTEK Pro Trolley, Charge Station. Available in Australia from the official CTEK stockist My Generator.

CTEK Pro Trolley, Charge Station, 2 Year Warranty. Carry all your battery management, laptop and other electrical analysis equipment together on TROLLEY PRO, the complete mobile test station.

The TROLLEY PRO is designed to carry a wide range of charging and testing equipment safely. Its tough, black powder coated steel frame and four wheels make the TROLLEY PRO easily manoeuvrable even in small spaces but the two wheel brakes keep it firm and still while youre using it. Plus, there are plenty of hooks for neat cable storage and its versatile, pre-drilled panel lets you mount your preferred CTEK pro charger combination right where you want it. It comes with a 2-year warranty.

A complete mobile test station for chargers, laptops, analysis instruments and batteries
All your equipment in one place
Perfect for flash programming and updating activity
Black powder coated steel construction with large rubber wheels
4 x M4 x 20mm screws for charger mounting
Load capacity: top plate 10kg; bottom shelf 25kg
Wheel size (rear/front): 200mm/75mm
Overall dimensions: 1060mm x 490mm x 590mm (HxWxD)
Weight: approximately 22kg
2-year warranty

Brand CTEK
SKU 56-604
Stockist My Generator

In stock CTEK Wall Bracket to suit MXTS40 & MXTS70/50. Available in Australia from the official CTEK stockist My Generator.

CTEK Wall Bracket to suit MXTS40 & MXTS70/50, 2 Year Warranty. Flexible storage for your CTEK workshop charger.

With the WALL HANGER PRO you can mount your CTEK workshop charger on the wall using the supplied metal bracket or you can also use the strap to carry it around with you. The WALL HANGER PROs durable rubber coated frame not only gives your charger extra stability, but also protects your vehicle against scratches. It comes with a 2-year warranty.

Suitable for use with MXTS40 and MXTS70/50
Hook for secure cable handling
Includes mounting bracket and carrying strap
Size: 500mm x 194mm x 100mm

Brand CTEK
SKU 40-068
Stockist My Generator

In stock CTEK CT5 Time to Go Battery Charger. Available in Australia from the official CTEK stockist My Generator.

CTEK CT5 Time to Go Battery Charger, 5 Year Warranty. The charger that tells you when youre ready to go. Take control of your day! Get your life back with the first battery charger in the world to show you exactly when your battery will be charged and ready to go.

The groundbreaking CT5 TIME TO GO battery charger and maintainer is a world first because it answers the question When will my battery be fully charged? This means you can plan your day around your battery charging because the CT5 TIME TO GO gives you an accurate prediction of the remaining charging time in hours. Not only that, itll also tell you when you can safely try to start your vehicle before the battery is fully charged. The CT5 TIME TO GO uses advanced technology to give you three charging and maintenance programs Normal, AGM and Recond. Its easy to use and fully automatic, so it can be connected directly to the battery indefinitely, if required, and it wont over or under charge.

Shows you exactly how long in hours until the battery is fully charged
AGM program
Recond program for reconditioning deeply discharged batteries
Fully automatic charging
5-year warranty

SAFETY INSTRUCTION

Brand CTEK
SKU 40-164
Stockist My Generator