Tag: Peggy Peg Stockist Australia

In stock Peggy Peg Standard Plastic Screw-in-Peg, 200mm, Pack of 12. Available in Australia from the official Peggy Peg stockist My Generator.

Peggy Peg Standard Plastic Screw-in-Peg, 200mm, Pack of 12, 1 Year Warranty. Peggy Peg Screw-in pegs proven a million times, the smartest way to tie down!

Five times lighter than an equivalent metal peg. Ten times better grip!
Generous thread for a secure grip. Ideal for soft, sandy soils!
Can also be used in hard, rocky grounds by using the height-adjustable hooks or Lock Nut!
Robust, fibre-glass, UV-resistant polyamide or Aluminium!
Quick and easy to use!
When it's time to go, just screw it out-it's that easy!

All our Peggy Peg plastic screw-in pegs are produced from Fibre-glass reinforced UV-resistant polyamide. At first sight, the colour may seem a bit odd, but our Peggy Pegs can be seen more quickly. Peggy N is the height-adjustable all-purpose Peggy Peg for awnings, cords and tents etc. Product testers travelling all around Europe have approved that Peggy N can be used in 90% of all cases by its height adjustment. Pre-drilling might be useful in hard or frozen grounds (take a 10 mm drill). Attention: Only continue to drill with all our Peggy Pegs as long as the screw is driving in.

Benefits:

Application: From normal or hard grounds to soft grounds.
Screws into ca. 90% of all grounds (tested).
All-rounder screw-in peg for many types of applications.
1/5 of the weight compared to a common peg.

Product Includes:

12 x Screw-in pegs – color: orange N 20cm
12 x Hooks N – color: blue

Brand Peggy Peg
SKU SUPP02
Stockist My Generator

In stock Peggy Peg Starter Kit. Available in Australia from the official Peggy Peg stockist My Generator.

Peggy Peg Starter Kit, 1 Year Warranty. The starter kit is a must-have for all serious campers!

It contains 30 standard pegs, 20 small pegs and a combo tool making it the most cost-effective way to buy in bulk. This will give you plenty of pegs to meet all your needs and even enough to assist a mate when his or hers conventional pegs are failing.

The starter kit contents come in a durable canvas zip-up bag that is big enough to comfortably house all the pegs and tools without struggling to close the zip

Peggy Peg Screw-in pegs proven a million times, the smartest way to tie down!

Screw-in pegs to screw in either via electric drill (avoid using impact drill) or with the manual device for tents and much more…
Five times lighter than an equivalent metal peg but ten times better grip! The compressing thread makes the Peggy Peg suitable for normal, soft or sandy grounds. The height-adjustable hook also allows using the Peggy N on hard or stony grounds. Simply screw the peg as far as it will go, attach the hook at the lowest point and you're all set for camping! (Pre-drilling can be useful, especially in hard conditions) If you want to leave your camping spot, simply unscrew them!

Benefits:

This set will cover 85% of all soil types and ground conditions (wet, dry, hard, soft, moist)
Have your essentials in 1 handy bag, where ever you may go!
weighs 1/5 compared to a common tent peg.

Set contains:

30 x Screw-in pegs N 20cm
30 x N Hooks
20 x Screw-in pegs S 12cm
2 x PreDrill 6 und 10mm
1 x Combination tool with alloy-adapter
1 x bag blue

Brand Peggy Peg
SKU SUPP03
Stockist My Generator

In stock Peggy Peg Small Screw-In-Peg, 120mm, Pack of 12. Available in Australia from the official Peggy Peg stockist My Generator.

Peggy Peg Small Screw-In-Peg, 120mm, Pack of 12, 1 Year Warranty. This small fibre-glass reinforced Screw-in peg S is something exceptional as it can be fixed without any hooks. Primarily, it is provided for loops of trekking tents and tent skirts as well as Peggy Peg-Plates (Fix&Go, Uni- and Anchor Plate) etc. Pre-drilling might be useful in compressed and compact grounds.

Benefits:

Application: compact, stony and soft grounds.
For loops, trekking tents and tent flaps.
Weighs 1/5 compared to a common tent peg.
Product contains:
12 x Screw-in pegs S 12cm

Specifications:

Material: PA with fibreglass
Lnge: 12cm
Wrench size: 17mm
Torque: max. 5Nm
Content: 1 Pack
Weigth: 0,213kg

Brand Peggy Peg
SKU SUPP05
Stockist My Generator

In stock Peggy Peg Large Plastic Screw-in-Peg, 310mm, Pack of 12. Available in Australia from the official Peggy Peg stockist My Generator.

Peggy Peg Large Plastic Screw-in-Peg, 310mm, Pack of 12, 1 Year Warranty. This Long, fibre-glass reinforced height-adjustable screw-in peg is provided for soft and sandy grounds, especially at the seaside. The Peggy L also works in combination with a height-adjustable clip. So even when it isn't possible to screw in the Peggy L completely into the ground it will hold and secure your camping equipment. Use the integrated height adjustment to place the double hook, which is certainly suitable to easily add cords and stretch them tightly without removing the Peggy L. Always choose the ring, which is closest to the ground for a better fixing because of the leverage effect. The size and length of the Peggy L are most suited to hold in soft soils. It's only possible to use the electric drill when screwing the Peggy L into soft grounds. Due to the limited power of the electric drill, we recommend you to use the manual device when screwing into harder grounds. Make sure that sandy grounds are solid, shifting sands (sand dunes) won't provide any grip for the Peggy L.

Benefits:

Application: For normal, soft and sandy grounds.
Suitable for securing tents and storm anchoring purposes.
Integrated height adjustment with hooks.
1/5 of the weight of a common tent peg.
Product contains:
2 x Screw-in pegs L 31cm – color: orange
2 x Hooks L + LA – color: blue

Brand Peggy Peg
SKU SUPP12
Stockist My Generator

In stock Peggy Peg Large Aluminium Screw-in-Peg, 310mm, Pack of 2. Available in Australia from the official Peggy Peg stockist My Generator.

Peggy Peg Large Aluminium Screw-in-Peg, 310mm, Pack of 2, 1 Year Warranty. The large Aluminium screw in tent pegs is the ultimate ground anchor. At 310mm long and weighing in at 115g, they are lightweight and strong. Designed for the larger tents and awnings or use in windy conditions they are our best seller along with their fibreglass brother.

The pegs are as user friendly as the fibreglass pegs, they are bright silver and easy to see to reduce the chance of losing them. They can be screwed in quickly with a cordless drill and the combo tool. You can also use the Combo tool to screw the pegs in by hand (sold separately).

Come pack up time the pegs need to be screwed out, you will be hard pushed to pull them out. They are just a quick to remove when breaking camp as the other pegs. The Large pegs are designed for maximum grip and excel in all ground types from soft sand, to the hard compacted ground where normal metal pegs just dont hold or bend when hammered in. The large pegs dont need to be screwed all the way in, as with the other pegs, as long as the threaded part is well anchored in, its doing its job. Simply move the adjustable blue rope clip close to the ground for best results.

Benefits:

Application: Soft to dense grounds with stones.
Suitable to fix large crew tents and make them stormproof.
Hight-adjustable Hooks.
Weighs 1/5 compared to a common tent peg.
Product contains:
2 x Screw-in pegs LA 31cm
2 x L + LA Hooks

Brand Peggy Peg
SKU SUPP13
Stockist My Generator

In stock Peggy Peg Fix & Go Anchor Plate. Available in Australia from the official Peggy Peg stockist My Generator.

Peggy Peg Fix & Go Anchor Plate, 1 Year Warranty. Even though the weather seems to be good, an awning should always be fixed tightly to the ground. The awarded Fix&Go Anchor Plate 2.0 will be a perfect solution.
While setting up your awning you simply put each leg in one of our Fix&Go Anchor Plate 2.0 and lock them in position. Secure the plates with a few Peggy screw-in pegs – ready.
The advantage of this Anchor Plate is that you can quickly retract the awning legs again by only opening the sliders. If you need some shade again you simply extend the awning and secure the awning legs back into the still secured Fix&Go Anchor Plates. Plate and locks were designed to suit almost every kind of awning and tent poles. (Fiamma, Thule Omnistor, regular tent poles up to 25mm) With the two orange sliders, you can quickly secure or unblock in just seconds. You can use every screw-in peg of the whole Peggy Peg range to fix the plate.

Unlike normal tent pegs, Peggy Pegs promote maximum holding in vertical movement due to the thread of the pegs as well as in horizontal directions. Used together with the Fix&Go Anchor Plate 2.0, this allows for excellent security of your awning as well as a piece of mind. So when the afternoon breeze picks up, you can be happy that your awning legs will remain firmly on the ground!

Peg&Stop screw-in pegs work on almost every ground in combination with their locknuts. The flat Fix&Go Plate offers a bigger area of support! In combination with two, Peggy L screw-in pegs awning legs or tent poles won’t sink on sandy ground/beaches.

Awning legs or tent poles are securely fixed and won’t sink into the ground or lift off.
Retraction of your awning is possible at any time.
Simple secure or unblock via the orange Fix&Go sliders.
Excellent security of your awning as well as a piece of mind!
Compatible with every Peggy Peg

Includes:

1 x Fix&Go Plate
1 x Storm hook

Brand Peggy Peg
SKU SUPP16
Stockist My Generator

In stock Peggy Peg Tie Strap. Available in Australia from the official Peggy Peg stockist My Generator.

Peggy Peg Tie Strap, 1 Year Warranty. The TieStrap is a wise extension for every awning owner. The bright coloured Strap is adjustable between 1,5-3 metres without having any loose cord ends. Our TieStrap is perfect for storm anchoring purposes for almost every awning in the market. Its also possible to use it for tents or sun sails. Peggy TieStrap is also necessary when you want to attach side elements to the awning while using our Fix&Go AntiFlap.
The Peggy TieStrap slides into the awning rails with the enclosed TConnector and is then anchored to the ground with a Peggy Peg or the u-shaped steel hook of the Anchor Plate 1.0 or 2.0. The incorporated relieving springs absorb a huge part of the wind power. Such a spring system is used for the first time in the European camping market and allows the strap to be flexible in the wind even if there is too much pressure. The TieStrap should be stretched away from the vehicle. This brings the advantage compared to a normal Storm Strap as it distributes the wind power to the whole length of the robust front aluminium bar. Clever solution: All our Peggy Peg sizes fit through the loop of the spring. This results in continuous tensioning – even if the strap is not properly tensioned, no part can unhook.

Practical advice: When the Peggy Peg is securely screwed into the ground, simply attach the spring via the hook the peg – ready!
Suitable for Peggy N, L, LA, HC and anchoring plates and Anchor Plates (optionally available). Recommended extensions: Fix&Go Storm Anchor Set and Fix&Go Anchor Plates

Benefits:

Adjustable strap (1,5 – 3 Meter).
Incorporated spring system allows for tension relief.
No loading of the awning leg joints.
Suitable for Screw-in pegs N, L, LA, HC.
Suitable for Kings, Dune, XTM, A.R.B., Supa peg, Fiamma, Carefree, Thule, Aussie Traveller, Dometic, 23Zero, Ironman 4×4, Nomad by CAOS etc.
Product contains:
1 x TieStrap with incorporated relieving springs
(we advise two for a standard sized awning)
1 x T-Connector 6 mm in its diameter

Brand Peggy Peg
SKU SUPP25
Stockist My Generator

In stock Peggy Peg 270 Awning Starter Kit. Available in Australia from the official Peggy Peg stockist My Generator.

Peggy Peg 270 Awning Starter Kit, 1 Year Warranty. The brand new Peggy Peg 270 Awning Kit is the essential pack for providing additional security for your awning.

The all-in-one kit boasts everything you need to set up your 270 awning in all sorts of soil types. Whether the ground is wet or dry, hard or soft, moist, rocky or sandy, youll have all the essentials ready to go in 1 bag. Soft or sandy conditions? The combination of the TieStrap and screw-in L and N pegs are just what you need. Ground a little (or a lot) hard and rocky? Use the HC peg and adjustable hook. All your gear, in one place!

Features:

Complete set up kit for 270 awnings
Kit can be used in all kinds of soil conditions and locations
Comes in a durable carry bag and is spacious enough to include other large pegs bought separately or some of your old pegs to keep them all together!
Designed in Europe
Manufactured in China

Kit includes:

3 x Screw-in pegs N 20cm
3 x Hit-in screw out Hardcore pegs 15cm
3 x Screw-in pegs L 32cm
3 x Crocodiles Peggy
6 x L Hooks
3 x N Hooks
3 x U-connectors
3 x T-connectors
1 x Combi alloy tool
1 x Bag orange

Brand Peggy Peg
SKU SUPP63
Stockist My Generator

In stock Peggy Peg Small Aluminium Screw-in-Peg, 150mm, Pack of 4. Available in Australia from the official Peggy Peg stockist My Generator.

Peggy Peg Small Aluminium Screw-in-Peg, 150mm, Pack of 4, 1 Year Warranty. The hard and rocky ground at the likes of Lightning Ridge and Mount Panorama at Bathurst are campers worst nightmare. With the Hardcore Peggy Peg you know the peg is going in and will stay in. no more frustration of bent pegs and hammering your fingers trying to get a normal peg in. And no more having to tie to other objects to secure your equipment, this bad boy has you covered.

The Hardcore peg is designed to be hammered into the hard-packed ground, rocky gravel, road base and we have even seen it hammered into the tarmac. But the best feature of this peg is that it will screw out in seconds meaning you wont have to get new pegs every time you head home.

The Hardcore tent pegs will save you time every time you use them and save you money over the long term as you wont have to replace them each time you go camping.

We have had conversations with customers who said they have used heaps of effort on the hammer drill to break the ground to get a normal peg in. Then at the same location were able to hammer in a Hardcore in a fraction of the time.

Manufactured from aluminium. Its 150mm long, dumpy 14mm diameter and light at 45g each and with a tensile strength of 70Nm, its the real deal. The design is like a wedge that expands in the ground the further it goes in. The lower part is threaded for grip but more importantly, the thread released the peg from the ground in a few twists. The rope clip works in the same way as all the other Peggy Pegs work and can be adjusted depending on how far the Hardcore Peg can be driven in.

Benefits:

Works great on extremely hard grounds.
Quickly hammered in and even quicker unscrewed (watch Video).
Much lighter than a common metal peg.
Product contains:
4 x Hit-in Screw-out Hardcore Peggy 15cm
4 x Hooks L + LA

Brand Peggy Peg
SKU SUHP61
Stockist My Generator

In stock Peggy Peg Hardcore Combo Tool. Available in Australia from the official Peggy Peg stockist My Generator.

Peggy Peg Hardcore Combo Tool, 1 Year Warranty. An adapter made of aluminium. Although the plastic adaptor is sufficient for the correct torque setting, it was just a logical step to design one for the Hardcore Peggy Line. The Alloy Tool is available individually to upgrade your system and is of course compatible with the T-Handle of the Combi-Tools made of polyamide.

Benefits:

Reinforced Adapter made of aluminium to withstand the required power when using our Hardcore Pegs.
Tool in two parts to be used either manually or with an electric drill.
Fits all Peggy Peg's

Includes:

1 x Alloy Tool Adapter
1 x Adapter

Brand Peggy Peg
SKU SUHP68
Stockist My Generator